• Design - 29 1/2 (748) in (mm) wide trapezoidal canopy

• Powerful - on the booster setting

• Efficient filtration- 10-ply stainless steel grease filters

• Safe and easy to clean - Miele CleanCover

• Suitable for every home - vented or recirculating

Blower
Blower	Dual-action blower
Blower	AC motor

Cleaning convenience
Cleaning convenience	EasyClean CleanCover hood liner

Construction type
Construction type	Wall ventilation hood

Control Panel
Control Panel	Electronic controls
Control Panel	Backlit controls
Power levels (number excl. Intensive)	3
Control Panel	Intensive setting
Control Panel	Programmable Intensive switch-off

Design
Color	Stainless steel
Design	RAL color possible as special order
Design	Customization possible on request
Design	Variable height available as special order

Filter System
Dishwasher-safe stainless steel grease filters	2

Installation Notes
Installation Notes	Vent connection at top
Installation Notes	Vent connection at top and rear
Diameter of vent connection in in.(mm)	6 (150)
Installation Notes	Telescopic chimney

LIGHTING
LIGHTING	LED ClearView lighting
Light intensity in Lx	300
Color temperature in K	3,000

Operating modes
Recirculated mode	Convertible

Safety
Safety	Safety shut-off

Standard accessories
Standard accessories	Non-return flap

Technical Data
Overall hood height for vented and external in in.(mm)	27 3/8 (695)-40 (1,015)
Overall hood height for recirculation in in.(mm)	32 1/2 (825)-45 1/8 (1,145)
Canopy width in in.(mm)	29 1/2 (748)
Height of hood canopy in in.(mm)	4 3/4 (120)
Depth of hood canopy in in.(mm)	20 1/2 (520)
Minimum distance above electric cooktops in in.(mm)	24 1/8 (610)
Minimum height above gas cooktop (max. 12.6 kW total power, burner 4.5 kW) in mm	26 (660)
Net weight in lbs. (kg)	56 (25.1)
Length of electrical wire in ft (m)	4 (1.5)
Technical Data	Standard plug fitted
Total connected load in kW	0.36
Voltage in V	120
Fuse rating in A	15
Number of phases	1

• User Manual&Assembly(Guarantee booklet)

• User Manual&Assembly(Operating instructions/Installation instructions)

• User Manual&Assembly(Assembly plan)

• Spec Sheet

Included in Standard Local Appliance Delivery:

1. Leveling and testing of the appliance to ensure proper connection.
2. Connection of the appliance to existing water connection, drain, or external dryer exhaust (for applicable appliances) provided the customer purchases new connections from Diamond Appliance Group.
3. Inspection of the appliance for visible damage.
4. Basic product demonstration and testing to ensure proper connection.
5. Haul-away of old appliances with a $25 recycle fee per appliance being hauled away.
6. Relocation of an old appliance within the same residence for a fee of $79 (reconnection not included).

Not Included in Standard Local Appliance Delivery:

1. Appliances not purchased at Diamond Appliance Group.
2. Installation of dishwashers, over-the-range microwaves, drop-in ranges, wall ovens, surface units, cooktops, gas dryers, air conditioners, or built-in refrigerators; installation available for additional fees.
3. Connection through floors or old ductwork.
4. Removal, haul-away, or recycling arrangements.